TUMI LOCKS

Maximize your security

Your new TSA-approved combination padlock is preset to open at 0-0-0 (even though the dials may be positioned at other numbers). You can change and reset your combination as often as you like.

Keep your combination in a safe and accessible place for future reference. This lock was designed to be recognized by the U.S. Transportation Security Administration, TSA, and allows the TSA to be able to unlock your bag, using special access codes and tools, if the need arises for a baggage search. This lock can then be relocked by the TSA with no damage to the lock or your bag.

Lock Name Lock Name

Padlock

Step 1
Start by ensuring every digit on your dial is set in the preset starting code at 0-0-0.
Step 2
Use a ballpoint pen to push the reset button on the bottom of the lock and hold down while adjusting each number on your three-digit dial.
Step 3
When you have finalized your new code, release your ballpoint pen’s pressure on the reset button to set the new combination.
Step 4
Open the lock by entering the set combination on the dial and pressing down on the unlock button.
Lock Name Lock Name

Dual Integrated Lock

Step 1
Start by ensuring your dial is set in the preset starting code 0-0-0 by releasing the zipper pullers from their housing. To do this, slide the TSA Lock as indicated by the arrows to unlock the zippers.
Step 2
Now that the preset code is confirmed, return the zipper pullers into the housing.
Step 3
Use a ballpoint pen to press down the reset button located next to the dial. After pressing down on the reset button, adjust each dial to your preference.
Step 4
When you have finalized your new code, push to slide the TSA Lock as indicated by the arrows. This causes the reset button to spring up and release the zipper pullers which confirms your new code is set.
Lock Name Lock Name

Integrated Lock

Step 1
Start by making sure every digit on your dial is set in the preset starting code at 0-0-0.
Step 2
To reset your code, use a ballpoint pen to press down the reset button. After pressing down on the reset button, adjust each dial to your preference.
Step 3
When you have finalized your new code, press down on the large release button, located to the right side of the TUMI logo. If the zippers pop out from the zipper pull, you have correctly set your lock.
Lock Name Lock Name

Low Profile Integrated Lock

Step 1
Start by ensuring every digit on your dial is set in the preset starting code at 0-0-0.
Step 2
Use a ballpoint pen to push the reset button on the bottom of the lock and hold down while adjusting each number on your three-digit dial.
Step 3
When you have finalized your new code, release your ballpoint pen’s pressure on the reset button to set the new combination.
Step 4
When you have finalized your new code, release your ballpoint pen’s pressure on the reset button.
Step 5
Now you have correctly set your lock. To test this, slide the TSA lock as indicated by the arrows to unlock the zippers.
Lock Name Lock Name

Snap Latch Lock

Step 1
Start by ensuring every digit on your dial is set in the preset code 0-0-0. Press the release button on side to open the lock.
Step 2
Once lock is open, use a ballpoint pen to press down on the reset button on the top of the lock. After pressing down on the reset button, adjust each dial to your preference.
Step 3
When you have finalized your new code, press on the release button again. The reset button will spring up which confirms you have set your new code.
Lock Name Lock Name

Briefcase Lock

Step 1
Start by making sure every digit on your dial is set in the preset starting code at 0-0-0.
Step 2
Use a ballpoint pen to push the reset button on the bottom of the lock and hold down while adjusting each number on your three-digit dial.
Step 3
When you have finalized your new code, release your ballpoint pen’s pressure on the reset button to set the new combination.
Step 4
Open the lock by entering the set combination on the dial and pressing down on the unlock button.